Slim Panel Pot Light - 4inch

Details information:

 DRIVER WIRING:1. Open the hardwire box swing cover and remove the appropriate knockout(s).2. Insert the electrical supply cable through the knockout and secure with a cable connector (sold separately).3. Using wire nuts, connect green ground wire of cable to green wire on box. Connect white wire of cable to white wire of box. Connect black wire of cable to black wire of box.4. Place all wiring and connections back in to the box and close the cover.5. Insert hardwire box through the mounting hole.New construction applications: Hardwire box shall be firmly secured to studs, joists, or similar fixed structural units.Remodel applications: Do not require the hardwire box to be firmly secured after the mounting plates, studs, joists, or structural units have been concealed

 4" round LED light fixture with isolated external driver installed inside junction box.

 Ultra-thin, 1" thick LED fixture, edge-lite, consumes 9W, emits over 550 lumens at 3000K and CRI 80+, offers comfortable Warm White light and less glare to eyes.

 Type IC rated, approved for direct contact with insulation and NO pot light housing is required; Air-tight and suitable for damp location.

 For new construction, insulated and dropped ceilings, easy to install into the 4-1/4" cut out.

 Dimmable with triac and ELV dimmers; cETLus and Energy Star Certified.