Home > Blog > Puck Light

Puck Light

Puck Light


After watching the video below, you'll know precisely how to install light emitting diode lights under your kitchen closet. You will find a minimal number of tools needed and for most ordinary size kitchens. The under cabinet Light-emitting diode lighting can be installed in a couple of hours. There are a few different types of Light-emitting diode lights. The most typical styles are the rod lights, tape strips and hockey puck designs. To simplify these conditions, they're commonly called bar and disc lighting. The wonderful thing relating to this kind of lighting is that once all the fittings are installed, they may be controlled from one switch location. 

The video demonstration uses what's know as a driver. This is the central place where all the lighting cable links are plugged in. The motorist has one power input plug which gets plugged into a socket that's wired into a wall switch. This motorist functions as a low voltage power converter for. Tools required for Installing Light-emitting diode Lights under cupboards - Tape Measure - -Electric Drill - -Pencil - -Recommended Hole Socket Drill Bit - -Cordless Drill - -Power Extension Cord - Seven Sixteenths Inch Drill Bit - Shop Vacuum Cleaner - To start, you must find out where your own low voltage transformer will be found. 

This may make the process go faster and easier with regards to the actual installation. You would like to find a place where it won't be visible. Next, layout the Light-emitting diode under cabinet lighting places to find out the proper spacing. Produce a plan for hiding the wires within the cabinets or everywhere they'll be hidden from sight. Mount the brackets on the bottom of the cabinet if you are utilizing disk or drill your own holes for your own puck lights under your own cabinets. Install the lights under the cabinets. The puck lights will get forced into your own hole you drilled. 

The tape Light-emitting diode light will need to have your own adhesive protector peeled off. Drill the necessary cable channel holes in your own upper cabinets by utilizing the seven sixteenths inch drill bit. That is a dusty job thats exactly what the void is for. Thread the wires throughout your own channels and connect them with your own lights and your own low voltage power converter. There should be more connections on your own terminal block of your own motorist for all the wires to be plugged into. Plug your own power cord into your own outlet. Flip the switch and you're finished. 

Where do the different kinds of Light-emitting diode lights work best according to kitchen cupboard design standards? The strip lighting usually gets set up behind light rail cabinet molding. The disk styles work wonderful to areas where your own lights are going to be in design view, like China cabinets or in cabinets that have glass doors.

Latest blog

View more

Products

Why JULLISON

Contact us

 +86 133 8032 6687

 JULLISON

 [email protected]

Blog

Your E-mail Addres

Learn More About Our Products

Copyright © JULLISON LED LLC. All Rights Reserved. Design By Gemelsoft.